First Step Grout & Pore Filler
Specially formula to facilitate polishing concrete filling pin holes scratches voids for improved appearance & gloss.
Intended Use
- Use when diamond polishing new or old concrete surfaces.
Product Features
- New technology combination of special blend of acrylics, surfactants, and silicates to improve polishing concrete with diamond tools
Physical Properties
- Flash Point – 248 F°
- Color – White
- Type of Solids – Acrylic & silicate
- Boiling Point – High- N/A Low- 212 F°
- Fragrance – Mild
Application Instructions
Apply First Step to the surface allow the product to remain wet proceed to grind with 100 grit tools make sure that the solution remains wet while grinding add more product if necessary. Allow the slurry paste to dry for at least two hours, clean your tools and remove the paste before it dries, once it dries it may be difficult to remove. After two hours First Step should be thoroughly dry proceed to polish remove the product with 100 grit tools & continue polishing following the steps applying Premium Lithium Densifier after 200 grit & 400 grit process.
Product Images
